AN-125 with electric motor on a trailer

From 2 100 000 ₽

In stock

Pumping unit AN-125 is designed for injection of flushing fluid during drilling of oil and gas wells; for injection of water into the reservoir during intensification of oil production; for pumping of various non-aggressive liquids, including watered oil.

Clay solution or water can be used as a flushing or pumping liquid. The content of mechanical impurities (sand, solid particles of drilled rock) should be no more than 1% by volume with hardness up to 1200 HV units.
Type of climatic execution - U1, placement category 2 according to GOST 15150-69.
Power supply system - three-phase alternating current network with nominal voltage 380 V, frequency 50 Hz. Electricity quality standards according to GOST 31309-98.

Composition:

• off-road trailer chassis;
• piston pump NB-125
• electric motor;
• V-belt transmission;
• V-belt transmission guard.

The pump transmission shaft is driven by an explosion-proof electric motor via a V-belt transmission. The piston pump is bolted to the machine chassis. The electric motor is mounted on a plate, which is secured to the machine chassis with bolts. The chassis of the unit has slots for the mounting bolts of the motor plate for adjusting the tension of the V-belt transmission belts.

Technical specifications of AN 125 Pump