Cementing unit ANP-320 on a trailer

From 2 700,000 ₽

In stock

Purpose

Pumping unit UNBP-125x32 (ANP-320) without water supply unit (pressing unit) is designed for injection of various non-aggressive media into wells in the process of their routine and workover maintenance.

Composition

off-road trailer chassis;
high-pressure pump;
manifold
YAMZ-238 or YAMZ-236 NE2 engine;
transmission;
control system for gears, clutch, fuel pump and engine stopping, pump activation;
electrical equipment

Execution

in a container*
with tent shelter*
with self-contained air heater*

Pumping units UNBP-125x32 (ANP-320)

The units are equipped with a heating device for the hydraulic part of high-pressure pumps to ensure operation of the units at low temperatures. Equipped with a system for monitoring the oil temperature in the crankcase of the cementing pump NC-320. Equipped with a collector for simultaneous operation of several aggregates during well cementing and a Ø50 mm adapter for connection to the suction hose receiving line.

A separate delivery of a set of mounted (deck) equipment of pumping unit UNBP-125х32 or equipment installation on the customer's transport base is provided.

Technical specifications

Assembly base	Off-road trailer chassis
Power drive	YAMZ-236 NE2; YAMZ-238
Drawdown power, not more, kW	176
High-pressure pump	NC-320
Useful power, kW	100
Maximum discharge pressure, MPa	40
Highest ideal flow rate, l/sec (l/min)	26 (1560)
Capacity of measuring tank, m³	6
Manifold conditional diameter, mm:
— receiver line	100
— discharge line	50
Cement mortar tank capacity, m³	0,25